Pneumatic Dual Fuel Forklifts

Overview:

 

Our FGX40D-FGX50D series Velox range forklifts balance a low operating cost with pure lifting power for the most demanding of indoor and outdoor requirements.

 

Offering a standard drum brake transmission with optional Japanese Okamura high spec drum brake for heavy industrial use, or an Optimal+ wet brake system. Laptop-free maintenance can be achieved using our Smart Dash technology with on-board diagnostics. Equipment can be tailored however tough the job.

 

Lighting:

 

• Integral overhead guard rear light unit with brake and direction indicators.
• Horizontal mounted anti-glare beacon
• Side, reverse, rear lights
• LED lighting optional.
• Blue safety light optional.
• Secondary LED lights available
• Full road+work CE approved configuration.

 

Operator Comfort:

 

• The ergonomically designed operator compartment is a fully floating and vibration isolated driver cell. With single pendant mounted brake pedal and fully adjustable suspension seat, it provides the operator with optimum levels of comfort for prolonged periods of time.
• The adjustable steering column allows the operator to easily find a comfortable driving position.
• The one piece, easily removable, steel floor plate provides unrivalled fast access for servicing. A rubber moulding floor-mat helps eliminate noise and vibration.

 

Safety:

 

All our models come with the option of operator presence sensing (OPS), automatically locking off all hydraulic functions and the transmission drive if the operator is not seated on the machine.

 

Engine:

 

With a full birth of industrial engines from the leading manufacturers of diesel standard units.

 

Offering:

• Nissan
• GM

 

Tier 3 and tier 4 options are available.

 

Instrumentation:

 

The LCD Smart Dash monitors all vital engine aspects providing quick and concise diagnostic information, giving a clear indication of truck parameters and service information. The smart dash will run a shut down procedure if any of its parameters are not in sync i.e if the engine temperature is above the recommended range. This in turn protects the engine and transmission from any major damage, making service and repair a quick, low cost solution.

 

Steering:

 

Using only the highest spec orbital valve from Eaton. Offering a superior steering control for improved maneuvering. Unlike most other brands the Nexen steer axle is fitted with tapered king pin roller bearings, maximising durability, comfort and extending the service life of parts.

 

​Counterweight:

 

The low slung modern design provides excellent stability. Designed and shaped to aid the driver with maximum visibility when reversing and optimised for advanced cooling even in the harshest of environments.

Overview:

 

Our FGX30D-FGX35D series x-range forklifts balance a low operating cost with pure lifting power for the most demanding of indoor and outdoor requirements.

 

Offering a standard drum brake transmission with optional Japanese Okamura high spec drum brake for heavy industrial use, or an Optimal+ wet brake system. Laptop-free maintenance can be achieved using our Smart Dash technology with on-board diagnostics. Equipment can be tailored however tough the job.

 

Lighting:

 

• Integral overhead guard rear light unit with brake and direction indicators.
• Horizontal mounted anti-glare beacon
• Side, reverse, rear lights
• LED lighting optional.
• Blue safety light optional.
• Secondary LED lights available
• Full road+work CE approved configuration.

 

Operator Comfort:

 

• The ergonomically designed operator compartment is a fully floating and vibration isolated driver cell. With single pendant mounted brake pedal and fully adjustable suspension seat, it provides the operator with optimum levels of comfort for prolonged periods of time.
• The adjustable steering column allows the operator to easily find a comfortable driving position.
• The one piece, easily removable, steel floor plate provides unrivalled fast access for servicing. A rubber moulding floor-mat helps eliminate noise and vibration.

 

Safety:

 

All our models come with the option of operator presence sensing (OPS), automatically locking off all hydraulic functions and the transmission drive if the operator is not seated on the machine.

 

Engine:

 

With a full birth of industrial engines from the leading manufacturers of diesel standard units.

 

Offering:

• Nissan
• GM

 

Tier 3 and tier 4 options are available.

 

Instrumentation:

 

The LCD Smart Dash monitors all vital engine aspects providing quick and concise diagnostic information, giving a clear indication of truck parameters and service information. The smart dash will run a shut down procedure if any of its parameters are not in sync i.e if the engine temperature is above the recommended range. This in turn protects the engine and transmission from any major damage, making service and repair a quick, low cost solution.

 

Steering:

 

Using only the highest spec orbital valve from Eaton. Offering a superior steering control for improved maneuvering. Unlike most other brands the Nexen steer axle is fitted with tapered king pin roller bearings, maximising durability, comfort and extending the service life of parts.

 

Counterweight:

 

The low slung modern design provides excellent stability. Designed and shaped to aid the driver with maximum visibility when reversing and optimised for advanced cooling even in the harshest of environments.

Overview:

 

Our Libero FGL50D-FGL70D series forklift are combined with both durability and ergonomics, providing productivity rivaling other leading forklifts and maintaining comfort for hours of tireless operation. Add friendliness to the environment, simple servicing, efficiency on the job, high standards of safety- its the perfect tool for even the most demanding of applications.

 

Transmission & Engine:

 

The transmission can be chosen among Okamura and NISSAN with advanced structure and dependable function. Among them, the Okamura transmission adopts advanced float type structure which can achieve a flexible connection between engine and frame, the vibrations of transmission to frame is reduced. The diesel engine provides great power, economical fuel consumption and dependable functions.

 

Efficiency:

 

Thanks to the long wheelbase design, the longitudal stability of the whole truck is much improved, the hoisting capacity at the same lift height are enhanced by an average of 100kg. At the same time, it prolongs work life of the rear wheels due to the reduced rear axle load.

 

Increasing the proportion of rigid hydraulic pipes and utilising right angle and straight through connectors reduces the pressure loss of the pipeline, in turn raising the lifting speed of the mast. A 10% speed increase has been noted on average compared with the previous model.

 

Turning radius and width of right angle stacking aisles are decreased by reducing the dimensions of the whole truck, which in turn can provide better efficiency for your warehouse.

 

Clean:

 

• Environment friendly engines all meet EU stage-II emission control regulations.
• Noise emission also comes up to EU standards.
• The metal hood and moulding sound insulation matches environmental protection demands.

 

Options:

 

• 2.0-5.0m duplex mast Auxiliary hydraulic value modules
• 2.5-4.0m full free duplex mast High mounted exhaust system
• 4.3-6.5m triplex mast Middle mounted exhaust system
• Special carriage and backrest Spark Arrester
• Other dimension forks Purified exhaust system
• Dual drive wheel with fender Radiator screen
• Solid tyres Sideshifter
• Non-marking tyre (White/Green) Intergrated sideshifter
• Cabin Other Attachment
• Heater and Air Condition Fire extinguisher
• Semi/Full suspension seat Dual/Special air cleaner
• Rear working light

Overview:

Our Libero FGL30D-FGL35D series forklift are combined with both durability and ergonomics, providing productivity rivaling other leading forklifts and maintaining comfort for hours of tireless operation. Add friendliness to the environment, simple servicing, efficiency on the job, high standards of safety- its the perfect tool for even the most demanding of applications.

 

Transmission & Engine:

 

The transmission can be chosen among Okamura and NISSAN with advanced structure and dependable function. Among them, the Okamura transmission adopts advanced float type structure which can achieve a flexible connection between engine and frame, the vibrations of transmission to frame is reduced. The diesel engine provides great power, economical fuel consumption and dependable functions.

 

Efficiency:

 

Thanks to the long wheelbase design, the longitudal stability of the whole truck is much improved, the hoisting capacity at the same lift height are enhanced by an average of 100kg. At the same time, it prolongs work life of the rear wheels due to the reduced rear axle load.

 

Increasing the proportion of rigid hydraulic pipes and utilising right angle and straight through connectors reduces the pressure loss of the pipeline, in turn raising the lifting speed of the mast. A 10% speed increase has been noted on average compared with the previous model.

 

Turning radius and width of right angle stacking aisles are decreased by reducing the dimensions of the whole truck, which in turn can provide better efficiency for your warehouse.

 

Clean:

 

• Environment friendly engines all meet EU stage-II emission control regulations.
• Noise emission also comes up to EU standards.
• The metal hood and moulding sound insulation matches environmental protection demands.

 

Options:

 

• 2.0-5.0m duplex mast Auxiliary hydraulic value modules
• 2.5-4.0m full free duplex mast High mounted exhaust system
• 4.3-6.5m triplex mast Middle mounted exhaust system
• Special carriage and backrest Spark Arrester
• Other dimension forks Purified exhaust system
• Dual drive wheel with fender Radiator screen
• Solid tyres Sideshifter
• Non-marking tyre (White/Green) Intergrated sideshifter
• Cabin Other Attachment
• Heater and Air Condition Fire extinguisher
• Semi/Full suspension seat Dual/Special air cleaner
• Rear working light

Operation:

 

Adopted advanced ergonomic technology optimizes the design of the control system, improves the operator comfort and much more. Adopting advance vibration-reduction technology for each parts design, the vibration across the entire truck can be reduced immensely. Among them the hood is designed to be a full floating type and the vibration reduction device for the steering axle enables the operation to be much more comfortable.

 

Appearance:

 

The latest aesthetic trends were used in the design of the Relevo range to create a truck that looks friendly and natural.

 

Efficiency:

 

Thanks to the long wheelbase design, the longitudal stability of the whole truck is much improved, the hoisting capacity at the same lift height are enhanced by an average of 100kg. At the same time, it prolongs work life of the rear wheels due to the reduced rear axle load.

 

Increasing the proportion of rigid hydraulic pipes and utilising right angle and straight through connectors reduces the pressure loss of the pipeline, in turn raising the lifting speed of the mast. A 10% speed increase has been noted on average compared with the previous model.

 

Turning radius and width of right angle stacking aisles are decreased by reducing the dimensions of the whole truck, which in turn can provide better efficiency for your warehouse.

 

Clean:

 

• Environment friendly engines all meet EU stage-II emission control regulations.
• Noise emission also comes up to EU standards.
• The metal hood and moulding sound insulation matches environmental protection demands.

 

Options:

 

• 2.0-4.5m duplex mast Auxiliary hydraulic value modules
• 2.5-4.0m full free duplex mast High mounted exhaust system
• 4.3-6.5m triplex mast Middle mounted exhaust system
• Special carriage and backrest Spark Arrester
• Other dimension forks Purified exhaust system
• Dual drive wheel with fender Radiator screen
• Solid tyres Sideshifter
• Non-marking tyre (White/Green) Intergrated sideshifter
• Cabin Other Attachment
• Heater and Air Condition Fire extinguisher
• Semi/Full suspension seat Dual/Special air cleaner
• Rear working light

Overview:

 

The Relevo FGR60D-FGR70D series forklift are combined with both durability and ergonomics, providing productivity rivaling other leading forklifts and maintaining comfort for hours of tireless operation. Add friendliness to the environment, simple servicing, efficiency on the job, high standards of safety- its the perfect tool for even the most demanding of applications.

 

Options:

 

• 2.0-5.0m duplex mast Auxiliary hydraulic value modules
• 2.5-5.0m full free duplex mast High mounted exhaust system
• 4.3-6.5m triplex mast Middle mounted exhaust system
• Special carriage and backrest Spark Arrester
• Other dimension forks Purified exhaust system
• Dual drive wheel with fender Radiator screen
• Solid tyres Sideshifter
• Non-marking tyre (White/Green) Intergrated sideshifter
• Cabin Other Attachment
• Heater and Air Condition Fire extinguisher
• Semi/Full suspension seat Dual/Special air cleaner
• Rear working light